General Features

• No 3rd Party software is used anywhere in Cabinet Pro. All software, to include optimization, are proprietary to Cabinet Pro LLC

• Face frame and frameless construction with no limit to how many setups

• Full Overlay and Inset Doors are fully supported

• Exports the cut list to RazorGage Machines, Tiger Loader, Giben Panel Saws, Omga, Accu-Systems OCS, MillVision, Weiner Dimter Opticut, MS Excel.

• Customized Batched Cutlist Reports, Individual Cutlist Reports, Door and Drawer Reports, Edgebanding reports.

• Each cutlist report may utilize heavy or light designations.

• Video tutorials on each screen explaining the use of that screen.

• Multiple workstations may utilize our Network module to store selected data on one computer accessed by all workstations.

• Entertainment centers, modular, custom, and angled cabinets

• Slanted cabinets to fit an angled ceiling

• Angled and curved cabinets

• All drawer styles to include horseshoe drawer boxes

• Dovetail and half-blind dovetail machining (on most routers)

• Doors and drawers with or without cabinets

• Can switch between inches and mm at any time

• Use American, Canadian, Australian, or UK English

• LITE Limitations in comparison to the full CNC Version:  5 rooms instead of 25, Maximum of 12 door styles, no bidding, no 3D floor plan design, no wall elevations, and no Tool Compensation..

CNC LITE Features

• All CNC machining is based upon design.  When the design changes, so does the machining (without further adjustments).

• Automatic Tool Selection when making dado and rabbet cuts.

• Several methods of effectively handling small parts

• Labels can be carved directly into selected parts

• Supports nested, point-to-point, and pod & rail CNC routers

• Smart CNC Rules make CNC Machining Material Independent

• Automatically moves machining closer to edge by the thickness of Edgebanding on that edge

• Control the order in which tools are used

• Control the order in which parts are cut out

• Automatically adjust spindle speed, feed rate, and plunge rate per material.

• Automatically use specified tool for part cutout per material

• Automatically select direction of part cutout per material

• Option to cut a part out with two different tools: the first pass is slightly oversized and rough, while the 2nd cut is a finishing cut to dimension with a different tool.

• Use Tabs or Skins of specified thickness per material, based on size of part or on all parts.

• Globally change from one method of construction to another simply by changing the Global Construction Setup, and the entire job will have its cut list, bid, and CNC machining changed accordingly with no further adjustments.

• All features described as "automatic" above must be created, programmed, and set up by the User.  In addition, although sample setups exist within Cabinet Pro, they require modification and must be customized by the User to fit the needs and requirements of the User and his/her company.  One-on-one training, some of which may be part of a purchase, helps to accomplish these tasks.  In addition, Video Tutorials at Cabinet Pro's Video Help Center are designed to guide the new User to be successful in setting up Cabinet Pro for his/her shop.