Make sure you are a customer and are current on update fees before downloading any of the files below!
Without this year's Passwords or Lifetime Support, the software below will not operate.

Download

Description

Full Installation Program


Complete Installation Program for Cabinet Pro and Door Pro.  ALL Training Video Tutorials can be found on this page as well.       
ALL Downloads are for Current Customers ONLY

Program Update
 

Program Update (Not to be installed if this is a FIRST-TIME installation.)
Do not download this update unless you are current with this year's update fees.

Video Tutorials & Support Files

All Training Video Tutorials may be downloaded from this page.  A password is required to unzip these files.

DO NOT INSTALL THE PROGRAM UPDATE ON FIRST-TIME INSTALLATIONS!

Downloading Tips

 


 

Miscellaneous Downloads

Make sure you are a customer and are current on update fees before downloading any of the files below!
Without the 2015 Passwords or Lifetime Support, the software below will not operate.

Download
(These files were included in the initial installation.)

Description

Date Posted Size Version

Splash Files

Various pictures required for Cabinet Pro and Door Pro.

2017 1MB All Versions

Default Face Frame Library

Sample face frame cabinets that will be unzipped directly into Cabinet Pro and can then be accessed at the Cabinet Library.

April 2017 1MB 2017.4.2+

Default Frameless Library

Sample frameless cabinets and closets that will be unzipped directly into Cabinet Pro and can then be accessed at the Cabinet Library.

April 2017 1MB 2017.4.2+

Default Construction Methods

Sample construction and CNC methods by region.  Also included in these files are the Face Frame and Frameless Libraries shown above.

April 2017 27MB 2017.4.2+

Standard Doors

Various pictures of doors used in Cabinet Pro and Door Pro.

Jun 9, 2015 1MB All Versions

Standard Drawers

Various pictures of drawers used in Cabinet Pro and Door Pro.

Jun 9, 2015 1MB All Versions

Standard Textures

Various pictures of textures used in Cabinet Pro and Door Pro. 

Apr 30, 2016 1MB All Versions

Video Scripts

Written scripts for Video Tutorials

Jan 25, 2008 1MB N/A

Closet & Garage Accessories

Wire Baskets, Slat Wall, etc.  These items will be placed in your face frame AND your frameless cabinet libraries and may be used for pricing and entered onto the floorplan.  However, no cutlist will be generated from these accessories.

Sep 14,, 2014 1MB 2014.9.6+

CDS Door Catalog

The Door Catalog for CDS Inc. 

Dec 31, 2008 1MB All Versions

  Final Release of 2016

Make sure` you are current on 2016 update/support fees before downloading this file!  This is the full setup file for both Cabinet Pro and Door Pro.  If you already have Cabinet Pro or Door Pro installed, you will have to uninstall it prior to installing this program.

Jan 5, 2016 96MB 2016.12.7

Please noteRegistration Numbers can only be generated for the current version because upgraded Security structures are incompatible with old versions.  The Final Release above is given as a courtesy for re-installing Cabinet Pro or Door Pro onto the same computer as existed when the software was first installed.  However, if you require a Registration Number, you will need to purchase this year's Version of Cabinet Pro or Door Pro.  See our official policy on this topic.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Click here for a comparison study of Cabinet Pro

 

Cabinet Pro®, Door Pro® and SimplyPowerful® are Registered Trademarks of Cabinet Pro LLC

Telephone: (541) 664-2808
Fax: (541) 664-2810

Click here to officially enter the website of Cabinet Pro and Door Pro

 

 

 

 

Contents of Video Tutorials

Unique to Cabinet Pro are (54) Setup, (113) Training, (13) Tech Support, and (21) CNC videos embedded within the software to assist users to understand and master the program. Designed to be used throughout the program, on-demand at the click of a button, to ensure quick and efficient mastery of Cabinet Pro, the following is a list of Video Tutorials that are available at no extra charge.

(54) Setup Videos (144MB ZIP)
Accessing Cabinet Case Parameters
Accessories
Adjusting Parameters per Part
Assigning a Cabinet to a Category
Assigning Material to Parts
Backup and Restore Options
Beginning a New Job
Cabinet Accessories and Hardware
Cabinet Case Construction Methods
Cabinet Placement on the Floorplan
Company Information
Creating Cabinet Categories
Custom Cabinets
Customize Opening Screen Photos
Cutlist Options
Door and Drawer Construction Methods
Door and Drawer Overlaps
Door and Drawer Parameters
Door Pull Location
Door Style Library
Drawer Guide Setup
Edgebanding
File Locations
General Options
Graphics Options
Hardware Inventory
How to use these videos
Learning the Floorplan Generator
Level 1 Introduction
Level 2 Introduction
Level 2 Summary
Level 3 Introduction
Level 8 Summary
Library Retrieval Options
Making a job - Start to Finish
Making Some Basic Cabinets
Material Setups
Measurement System
Miscellaneous Options
Modular Cabinets
Naming Cabinets
Options when saving a library
Panel Optimization Setup
Saving a Copied Cabinet
Saving Cabinets
Setting Up Accessories
Setting Up Hardware
Shop Drawing Options
Testing the Cutlist
Testing your Pricing Setup
The Bid and Pricing Setup
Toe Kicks
Understanding the Cabinet Editor

(113) Training Videos (345MB ZIP)
Accessories and Pricing
Adding a Cutlist Report
Adding a new Door Style
Adjusting Lighting
Amortization of a Loan
Angled Walls
Appliances and Appliance Garages
Appliances and Cabinets
Assembly Units
Auto Single Job Backups
Auto-filling a Wall
Automatic Full Backups
Backs, Scribes, and Fillers
Cabinet Case Parameters
Cabinet Information
Cabinet Specific Parameters
Cabinet Width and Height Information
Calculating the radius of any arc
Cathedral Template Groups
Changing Material and Hardware for 1 cabinet
Changing Rooms in a Job
Counter Top and Corbels
Crown Moulding and Counter Tops
Custom Floors
Customer Management
Decorative Finished Ends and Backs
Default Door and Drawer Reveals
Dimensioning and Formatting a Drawing
Display Options
Door and Drawer Information
Door Categories
Doors and Drawer Options
Doors and Pulls
Double Sided Cabinets
Drawers
Edge Profiles
Edgebanding and CNC
Edit Mode in the Cabinet Editor
Empty Spaces for Specialty Cabinets
Ends and Corners
Entry Doors and Windows
Exploding a Cabinet
Export Cutlist
Face Frame Details
Filling an Empty Space
Finish Command
Finished Ends and Unfinished Ends
Finishes and Stains
Fixed Heights of Drawer Sides
Fixed Lengths of Drawer Boxes
Floorplan Library
Frame Profiles
General Construction
General Display Options
General Door Construction
General Drawer Construction
General Information
General Inventory
Global Changes in the Floorplan
Global Changes
Hardware Setups
Hiding One Cabinet
Hiding Selected Items
How to Copy Jobs to another folder
Individual Label Format
Job Information
Joining Cabinets
Library Categories
Making a Long Custom Cabinet
Making an Oven Cabinet
Material, Hardware, and Markups
Measurements
Method of Dragging Objects
Method of Moving objects
Method of Rotating objects
Moving Multiple Cabinets
Multiple Views
Nailers, Stretchers, and Moulding
Opening and Closing Doors
Page Format
Panel Profiles
Part Machining Definitions
Part Textures and Line Styles
Placing Cabinets One by One
Premium Graphics
Preparing a bid for the whole job
Presentation Overview
Pricing Options
Quick Report
Radius and Clipped Corners
Room and Cabinet Dimensions
Room Information
Saving 3D Textures as room defaults
Saving a Library Cabinet
Selecting a Wall
Shelves, Dividers, and Closet Rods
Single Cabinet Cutlists
Single Job Backups
Snapping Options
Sorting and Formatting Options
Square Foot Charges per Cabinet
Standard Heights and Depths
Taxes and Job Information
The Job Management Screen
The Pricing Grid
User-Defined Charges
View Available Information per Label
View the Labels
Viewing 2D Elevations
Viewing 3D Renderings
Viewing the Cabinet Library
Viewing the Faceframe Only

(13) Tech Support Videos (24MB ZIP)
TS-Construction Method per Cabinet
TS-Drawer Box Report
TS-Getting a Registration Number
TS-Highlighting a Cabinet
TS-How to Email your Job Presentation
TS-How to Format Labels
TS-Making Doors and Windows
TS-No Nailers or Stretchers?
TS-Parts not appearing on the cutlist
TS-Reports, Parts and Labels
TS-Using Word for Labels
TS-Which Features

(21) CNC Videos (77MB ZIP)
Blind Dado Considerations
CNC General Options
CNC Tool Order
CNC Setup Menu
Creating a Dado Cut
Creating a Drilling Pattern
Creating a Rectangle Cut
Level 6 Introduction
Machine Setup
Post Processor Setup
SR-Accuracy of Smart Rules
SR-Adjustments for Blind Dados
SR-Affected Cabinets
SR-Drawer Guide Holes
SR-Hinge Plate Holes
SR-Horizontal and Vertical Partitions
SR-Shelf Holes
SR-Using Both Methods
Testing the CNC Link
Tool Library Setup

 

 

 

Click here for a comparison study of Cabinet Pro

 

Cabinet Pro®, Door Pro® and SimplyPowerful® are Registered Trademarks of Cabinet Pro LLC

Telephone: (541) 664-2808
Fax: (541) 664-2810

Click here to officially enter the website of Cabinet Pro and Door Pro

Test

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Pre-Release